Skip to content
Shafts & Pins

Shafts, Pins & Axles, CNC Turned to Drawing

We review your drawing and place your shafts, pins and axles with a vetted partner shop.

In short

CNC shafts, pins and axles in steel, stainless steel and aluminium, with fits such as H7/g6, grooves, threads and keyways. Strobel Industry places them to drawing with vetted partner shops that machine shafts complete on turn-mill centres with a sub-spindle. From 1 piece, reply within 24 hours.

Background

Shafts & axles from the right turning shop

Shafts and pins are the load-bearing elements in mechanical engineering. Bearing seats with h6 tolerance, keyways, thread ends and accurate runout decide whether they work. Specialists from our team check your drawing for these points before we place it.

Our partner shops turn stepped shafts complete in one setup on turn-mill centres with driven tools: turning, threading, keyway and cross hole. This secures runout and concentricity. We pass your part to the shop whose machine fits its diameter, length and quantity.

h6
Shaft tolerance
≤0.01
Runout mm
1
piece minimum
24 h
Reply
Component types

Shafts, pins & axles at a glance

From a simple axle to a complex stepped shaft. We place every type with a partner shop that is set up for it.

Shaft

Stepped shafts

Multi-step shafts with bearing seats, keyways, thread ends and seal seats. Complete machining in one setup.

Pin

Pins

Cylindrical pins with cross hole, thread, groove or flat. As hinge, axle or fastening pins.

Axle

Axles

Static or rotating axles with bearing seats, shoulders and defined runout. For rollers, wheels and pulleys.

Dowel

Dowel pins

Cylindrical pins to ISO 2338 (h8) or ISO 8734 (h6/m6). As locating or centring pins.

Adapter

Adapter shafts

Transition shafts with different diameters, fits and splines. For connecting different drive components.

Thread

Threaded studs

Pins with internal or external thread on one or both ends. As studs, stud bolts or tie rods.

What matters

What makes a good shaft

01

Runout ≤ 0.01

When all diameters are turned in one setup, good turning shops achieve runout and concentricity of ≤ 0.01 mm.

02

Bearing seats h6/k6

Shaft tolerance h6 for rolling bearings, k6 and m6 for interference fits. Good shops check bearing seats with a micrometer.

03

Complete machining

Turning, threading, keyway, cross hole and grooves in one setup, on a turn-mill centre with driven tools.

04

All materials

S355, 42CrMo4, stainless 1.4305/1.4404, aluminium 6082/7075, brass, bronze, titanium.

05

Ø on request

Slender shafts with a small diameter run on sliding-head lathes, large shafts on turn-mill centres. State diameter and length in your enquiry.

06

From 1 piece

Single shafts, prototypes and series. For series, partner shops use bar feeders, which lowers the unit price.

Process

Your shaft in 5 steps

01
Step 01

Send drawing

Technical drawing with bearing seats, tolerances, threads, material and quantity.

02
Step 02

Review

Specialists from our team review the drawing and get back to you within 24 hours with the right partner shop.

03
Step 03

Quote

The partner shop prepares the quote with unit price and delivery date.

04
Step 04

Production

The partner turns the shaft and checks runout and bearing seats. If you need an inspection report, state it in your enquiry.

05
Step 05

Delivery

The partner shop delivers directly to you and issues the invoice.

Tolerances

Tolerances for shafts & axles

Shaft tolerance h6 / k6 / m6

Bearing seats h6 for rolling bearings, k6 and m6 for interference fits. Measured with a micrometer.

Runout ≤ 0.01 mm

Achievable when all diameters are turned in one setup. Put the runout tolerance on the drawing.

Surface Ra 0.8

Bearing seats Ra 0.8 by fine turning. Sealing surfaces down to Ra 0.4 are possible, usually by grinding.

Length tolerance ± 0.05

Shoulder lengths and overall length ± 0.05 mm are common. Shoulders are faced for axial stops.

In the network

Typical machine for shafts & axles

Turn-mill centre

Turn-mill centre

CNC lathe with driven tools, C axis and sub-spindle, suited to stepped shafts with keyway and cross hole. We place your part with the shop whose machine fits its diameter, length and quantity.

Diameter
on request
Machining
Turning & milling
Tools
driven
Series
with bar feeder
Industries

Shafts for your industry

Mechanical engineering

Drive shafts, gearbox shafts and idler axles for machines and plants.

Automotive

Axle pins, steering shafts and stub axles for chassis and drivetrain.

Conveyor technology

Roller axles, idler shafts and tensioning pins for belt and roller conveyors.

Automation

Linear axles, guide shafts and locating pins for robotics and handling.

Pumps & compressors

Pump shafts, rotor shafts and bearing seats for rotating machinery.

Maintenance

Replacement shafts, pins and axles to drawing. If you only have a sample, say so in your enquiry.

FAQ

Questions about shafts & pins

Q1Which shaft types can I enquire about?

Stepped shafts, gearbox shafts, drive shafts, axles, pins, dowel pins and threaded rods, including keyways and cross holes. We place them with vetted partner shops that are set up for shafts.

Q2How is runout ensured?

By turning all diameters in one setup. That way good turning shops achieve runout of ≤ 0.01 mm and check it with a dial gauge. Put the runout tolerance on the drawing and we place the part with a shop that holds it.

Q3Which bearing seat tolerances are possible?

Shaft tolerance h6 for rolling bearings, k6 and m6 for interference fits. Good turning shops measure bearing seats with a micrometer at 0.001 mm resolution.

Q4Up to what diameter are shafts possible?

That depends on the partner shop. Slender shafts with a small diameter are made on sliding-head lathes, large shafts on turn-mill centres with a chuck. State diameter and length in your enquiry and we check which shop fits.

Q5Are shafts with a keyway possible?

Yes. On turn-mill centres with driven tools and a C axis the keyway is milled in the same setup. We place your shaft with a shop that has such a machine.

Q6Which materials are possible for shafts?

S355, C45, 42CrMo4, 1.4305, 1.4404, EN AW-6082, EN AW-7075, brass, bronze and titanium. If you need a 3.1 material certificate, state it in your enquiry and we place the part with partner shops that supply it.

Q7What is the minimum quantity?

1 piece. For series, partner shops use bar feeders, which lowers the unit price. The enquiry and the placement are free of charge for you.

Q8How long does delivery take?

The partner shop states the lead time in its quote. It depends on complexity, quantity, material and capacity. If it is urgent, put your target date in the enquiry. We will then look specifically for a shop that can meet it.

Request shafts & pins

Send us your drawing. We review it and get back to you within 24 hours with the right partner shop.

Contact

Ready for the next step?

Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .

Strobel Industry Team
✉️ Send Email 📞 +49 (0)172 51 00 715

We will get back to you within 24 hours.