Custom Parts & Flanges to Drawing
We review your drawing and place custom parts, flanges and adapters with a vetted partner shop.
CNC custom parts and custom flanges to drawing, as one-offs or series in all common metals and plastics. Strobel Industry places them with vetted partner shops that produce complex geometries with combined turning and milling. Specialists from our team check feasibility first. Reply within 24 hours.
From one-off to series
Custom parts and flanges are the backbone of every special-purpose machine. We review your drawing, STEP file or 3D model and place the part with a vetted partner shop that achieves the required tolerance class.
Whether a hydraulic connection flange, an adapter between two standards or a completely new component: our partner shops work with 3- and 5-axis machining centres and CNC lathes and cover the whole range.
Flanges, adapters & custom parts
From standard shapes to complex one-offs. We place your part with a partner shop that is set up for it.
Connection flanges
DIN, ANSI or custom flanges with bolt patterns to drawing. All common materials.
Hydraulic adapters
Transition pieces between different thread sizes and standards. Leak-tight and pressure-rated.
Spacers
Spacer blocks, intermediate rings and distance plates. Exact lengths and parallelism.
Brackets
Sensor holders, motor brackets and pivot bearings. 3D contours milled from solid.
Coupling pieces
Connecting elements between shafts, motors and gearboxes. Tight fits and zero backlash.
Custom housings
Protective housings, valve blocks and manifolds. Multi-side machining in one setup.
Why Strobel for custom parts
From 1 piece
No tooling costs. We place one-offs with partner shops that are set up for small batches.
All materials
Steel, stainless steel, aluminium, brass, copper, titanium, plastics. We place the part with the shop that knows your material.
Complete machining
Turning and milling in one setup. Less re-clamping means more precision.
Drawing review
We read STEP, IGES, DXF and PDF. Specialists from our team review the drawing and clarify open technical points before we place it.
Target date
If it is urgent, put your target date in the enquiry. We will then look specifically for a shop that can meet it.
Documentation
State inspection reports, 3.1 material certificates or declarations of conformity in your enquiry. We place the part with partner shops that supply them.
In 5 steps to your part
Send drawing
By email or enquiry form. STEP, DXF, PDF and all common formats.
Review in 24 h
Specialists from our team review the drawing and get back to you within 24 hours with the right partner shop.
Quote
The partner shop prepares the quote with unit price and delivery date. You place the order directly with the partner.
Production
The partner turns and mills your part. For series parts, agree a first article directly with the partner shop.
Delivery
The partner shop delivers directly to you and issues the invoice.
Achievable accuracy
General tolerances
ISO 2768-m/f as standard. Tighter tolerances as specified on the drawing, good shops achieve IT6.
Surface finish
Ra 1.6 is common, Ra 0.4 or better on ground surfaces and fits.
Positional accuracy
Hole patterns with ±0.02 mm positional tolerance are achievable, as are exact bolt circle diameters.
Parallelism
≤ 0.01 mm on sealing and mounting faces is achievable. Put the requirement on the drawing.
Typical machines

Machining centre
Machining centre with 3 to 5 axes for flanges, plates, brackets and housings.
Turn-mill centre
CNC lathe with driven tools for round flanges, adapters and coupling pieces.
Custom parts for your industry
Mechanical engineering
Flanges, brackets and custom components for plants and special-purpose machines.
Hydraulics
Adapter pieces, manifolds and connection plates for hydraulic systems.
Medical technology
Stainless steel custom parts with high surface quality for medical devices.
Automotive
Test fixtures, tool holders and gauge holders.
Shipbuilding
Corrosion-resistant flanges and adapters for maritime applications.
Energy technology
Flanges and transition pieces for wind, solar and conventional power plants.
Frequently asked questions
Q1What are custom parts?
Custom parts are components that are not available from a catalogue. They are made to your drawing or 3D model.
Q2Which flange types are possible?
DIN flanges, ANSI flanges, custom flanges and plate flanges, including individual bolt patterns and sealing faces. We place them with partner shops that are set up for flanges.
Q3Which materials are possible for custom parts?
Steel (S355, C45), stainless steel (1.4301, 1.4404), aluminium (6082, 7075), brass, copper, titanium and plastics such as POM and PEEK.
Q4What is the minimum quantity?
1 piece. Custom parts are often one-offs, so we place them with partner shops that are set up for small batches. The enquiry and the placement are free of charge for you.
Q5How quickly is a custom part ready?
The partner shop states the lead time in its quote. It depends on complexity, quantity, material and capacity. If it is urgent, put your target date in the enquiry. We will then look specifically for a shop that can meet it.
Q6Are assembled sub-assemblies possible?
State in your enquiry that you need a sub-assembly of several parts. We place it with partner shops that also handle assembly. You agree the details directly with the partner shop.
Q7Which file formats can I send?
STEP, IGES, DXF, DWG and PDF drawings. If in doubt, send what you have. We check whether it is enough for an enquiry.
Q8Is surface treatment possible?
Yes. State anodising, black oxide, nickel plating, chromating or other coatings in your enquiry. We place the part with partner shops that supply them.
Request a custom part
Send us your drawing. We review it and get back to you within 24 hours with the right partner shop.
Ready for the
next step?
Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .