Skip to content
Complete machining

CNC turning and milling in one setup

Turned parts with cross holes, threads and milled faces in one setup: we place them with vetted partner shops that run turn-mill centres.

In short

Complete machining combines turning, milling, drilling and threading in a single setup. This avoids re-clamping errors, shortens throughput time and improves accuracy, because main and sub-spindle machine the part in one pass. Strobel Industry places such parts with vetted partner shops that run turn-mill centres. Specialists from our team review the drawing, and you get a reply within 24 hours.

Method

Everything in one setup

Traditionally, complex turned parts pass through several machines: lathe, boring mill, milling machine. Every re-clamping costs time and introduces positional deviations. With complete machining, turning, drilling, cross holes, threads and milled faces are all produced in one setup.

Our partner shops do this on turn-mill centres with driven tools, C and Y axis. We place your turned part with the shop whose machine fits its size, geometry and quantity.

1×
Setup
C+Y
Axes
5+
Operations
24 h
Reply
Operations

Operations in one setup

All machining steps on one turn-mill centre, without re-clamping.

Turning

CNC turning

Longitudinal and face turning, contours, grooves, parting off. Roughing and finishing in one setup.

Drilling

Drilling & deep-hole drilling

Centre holes, through holes, blind holes. Axial and radial via driven tools.

Cross

Cross holes

Radial holes with C-axis positioning and driven tools. Metric and imperial dimensions.

Thread

Thread turning & tapping

Metric threads, fine pitch, imperial (UNC/UNF, BSP) and trapezoidal threads. External and internal, directly on the lathe.

Milling

Milling (Y axis)

Face milling, wrench flats, slots and keyways via the Y axis. No re-clamping onto a milling machine.

Finish

Knurling & engraving

Cross and straight knurling directly on the lathe. Markings and identification by engraving.

Benefits

Benefits of complete machining

01

No re-clamping time

No re-clamping between turning, drilling and milling. This saves considerable throughput time, because setup, waiting and transport between machines disappear.

02

High concentricity

Cross holes, threads and milled faces reference directly to the turning axis. Runout ≤ 0.01 mm is readily achievable this way.

03

Driven tools

Driven tools in the turret for drilling, milling and tapping.

04

C axis & Y axis

Precise angular positioning (C axis) and off-centre machining (Y axis) for complex geometries.

05

Fewer error sources

No re-clamping means no positional deviation. Every dimension is machined in relation to the turning axis.

06

More economical

Fewer operations, less machine occupancy, less logistics. Ideal for small and medium batches.

Process

Your turned part in 5 steps

01
Step 01

Send enquiry

Drawing or 3D model with all operations: holes, threads, milled faces.

02
Step 02

Review

Specialists from our team check whether all operations are feasible in one setup and clarify open points with you.

03
Step 03

Placement

Within 24 hours we get back to you with the right partner shop. The partner prepares the quote with unit price and lead time.

04
Step 04

Complete machining

At the partner shop in one setup: turning, drilling, cross holes, threads, milling.

05
Step 05

Delivery

Delivery and invoice come directly from the partner shop. If you need an inspection report, state it in your enquiry.

Tolerances

Accuracy of complete machining

Dimensional tolerances IT7, IT6

Because all dimensions are produced in one setup, clamping errors do not add up. Good shops hold IT7 as standard and IT6 on request.

Cross hole position

Cross holes are indexed via the C axis. A positional accuracy of ±0.05 mm relative to the turning axis is common.

Thread tolerances

Threads to ISO 6H/6g, including fine pitch, imperial and special threads. Inspection with thread plug and ring gauges.

Surfaces to Ra 0.8

Ra 1.6 from finishing as standard, Ra 0.8 by fine turning. Cross holes and milled faces typically Ra 1.6.

In the network

Machine type for complete machining

Turn-mill centre

Turn-mill centre

CNC lathe with driven tools, C and Y axis, often with a sub-spindle. Our partner shops use it to machine turned parts completely in one setup.

Machining
Turn + mill
Axes
X/Z/C/Y
Tools
driven
Diameter
on request
Industries

Complete machining for your industry

Hydraulics

Valve bodies with cross holes, threaded ports and sealing seats, complete in one setup.

Pneumatics

Cylinder housings, pistons and connection adapters with radial holes and fine threads.

Mechanical engineering

Shaft ends with wrench flats, cross holes and threads. Without re-clamping, with clean concentricity.

Automotive

Axle bolts, bearing seats and special screws with cross holes and locking threads.

Valves and fittings

Housings and adapters with multiple threaded ports and sealing faces, completely turned.

Special machinery

Individual turned parts with complex operations. Complete machining makes them economical even in small quantities.

FAQ

Questions about complete machining

Q1What does complete machining mean?

Complete machining means that all machining steps (turning, drilling, cross holes, threading, milling) are carried out on a single machine in one setup, without re-clamping.

Q2Which machines are used?

Our partner shops work with turn-mill centres with driven tools, C and Y axis, often with a sub-spindle. We choose the shop whose machine fits your part size and quantity.

Q3Which cross holes are possible?

Radial holes, typically Ø 1 to 20 mm depending on the partner shop. The position is indexed via the C axis, ±0.05 mm is common. Multiple cross holes at different angles are also possible.

Q4Which threads are possible?

Metric threads, fine pitch, imperial (UNC/UNF, BSP) and trapezoidal threads, internal and external. Good shops inspect threads with thread plug and ring gauges.

Q5What does complete machining save?

Above all throughput time: re-clamping, intermediate storage and transport between machines disappear. How much that adds up to depends on the part. The difference is greatest for turned parts with several cross holes and milled faces.

Q6From what quantity is it worthwhile?

From 1 piece. Complete machining is particularly economical for small and medium batch sizes, because re-clamping and extra setups on further machines are eliminated.

Q7Which materials are possible?

All common turning materials: aluminium, stainless steel, structural steel, quenched and tempered steel, free-cutting steel, brass, copper and titanium. We clarify which partner shop has experience with your material before placing the order.

Q8How large can the turned parts be?

That depends on the partner shop. State diameter and length in your enquiry. We check which shop can machine your part, from small bar parts to large chuck parts.

Request complete machining

Send us your drawing. We review it and get back to you within 24 hours with the right partner shop.

Contact

Ready for the next step?

Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .

Strobel Industry Team
✉️ Send Email 📞 +49 (0)172 51 00 715

We will get back to you within 24 hours.