Bushings, Sleeves & Spacers, CNC Turned
We review your drawing and place plain bushings, threaded bushings and sleeves with a vetted partner shop.
CNC bushings and sleeves in steel, stainless steel, brass, bronze, aluminium and plastics, with fits from H7 and internal and external threads. Strobel Industry places them to drawing with vetted partner shops that turn bore and outside diameter in one setup, using bar feeders for series. From 1 piece, reply within 24 hours.
Bushings & sleeves from the right turning shop
Bushings and sleeves are the most common rotationally symmetric parts in mechanical engineering: plain bearings, thread inserts, spacers and clamping elements. Fit and concentricity are what count. Specialists from our team check your drawing for these points before we place it.
Our partner shops turn bushings with internal and external threads and fits from H7 complete in one setup, on turn-mill centres with a sub-spindle or, for small diameters, on sliding-head lathes. This secures the concentricity between bore and outside diameter.
Types & variants
From a simple spacer sleeve to a complex threaded bushing. We place every type with a partner shop that is set up for it.
Plain bushings
Cylindrical bushings with a tight bore fit (H7). As plain bearings, guide bushings or bearing bushings. In bronze, brass or steel.
Threaded bushings
Bushings with internal thread (M3 to M30) and/or external thread. As thread inserts, reducers or adapters.
Spacer sleeves
Spacers with a defined length tolerance. For bolted joints, shaft assembly and sub-assemblies.
Clamping sleeves
Slotted sleeves for a friction-locked connection on shafts or in bores. DIN 1481 / ISO 8752.
Adapter bushings
Transition bushings with two different diameters or fits. For connecting different shaft sizes.
Flanged bushings
Bushings with a collar for axial positioning. As a bearing bushing with an integrated axial stop.
What makes a good bushing
Concentricity ≤ 0.01
When bore and outside diameter are turned in one setup, good turning shops achieve concentricity of ≤ 0.01 mm.
Fits from H7
Clearance fits (H7/f7), transition fits (H7/k6) and interference fits (H7/p6), to your drawing.
Complete machining
Turning, threading, cross holes and grooves in one setup, without re-clamping.
All materials
Aluminium, stainless steel, free-cutting steel, brass, bronze, copper and plastics (POM, PEEK, PA).
From 1 piece
One-offs, prototypes and series. For series, partner shops use bar feeders, which lowers the unit price.
Threads M3 to M30
Internal and external threads, metric, fine pitch, imperial (UNC/UNF). Checked with thread plug and ring gauges.
Your bushing in 5 steps
Send drawing
Technical drawing with fits, threads, material and quantity.
Review
Specialists from our team review the drawing and get back to you within 24 hours with the right partner shop.
Quote
The partner shop prepares the quote with unit price and delivery date.
Production
The partner turns the bushings and checks fits and threads with gauges. If you need an inspection report, state it in your enquiry.
Delivery
The partner shop delivers directly to you and issues the invoice.
Tolerances for bushings & sleeves
Fits H7 / g6 / p6
Clearance, transition and interference fits to ISO 286. Checked with limit gauges.
Concentricity bore/OD
Concentricity of ≤ 0.01 mm between bore and outside diameter is achievable when both are turned in one setup.
Threads 6H / 6g
Internal and external threads to ISO tolerance. Checked with thread plug and ring gauges.
Surfaces Ra 0.8
Bores typically Ra 1.6, Ra 0.8 by fine turning. Outside surfaces Ra 0.8 to Ra 3.2.
Typical machine for bushings & sleeves
Turn-mill centre
CNC lathe with driven tools, C axis and sub-spindle, suited to bushings with cross holes and threads in one setup. We place your part with the shop whose machine fits its diameter, material and quantity.
Bushings for your industry
Mechanical engineering
Plain bushings, bearing bushings and spacer sleeves for shafts, axles and linear guides.
Hydraulics & pneumatics
Guide bushings, seal seats and threaded bushings for cylinders and valves.
Automotive
Liner bushings, bearing bushings and spacer sleeves for chassis, drivetrain and steering.
Plant engineering
Adapter bushings and reducers for pipework, flanges and couplings.
Tool making
Guide bushings for punches and dies. High demands on fit and wear resistance.
Maintenance
Replacement bushings and sleeves to drawing, including parts that are no longer available.
Questions about bushings & sleeves
Q1Which bushing types can I enquire about?
Plain bushings, threaded bushings, spacer sleeves, clamping sleeves, adapter bushings and flanged bushings, plus special shapes to drawing. We place them with vetted partner shops that are set up for turned parts.
Q2Which fits are possible?
All common ISO fits: clearance fits (H7/f7, H7/e8), transition fits (H7/k6, H7/m6) and interference fits (H7/p6, H7/r6). Put the fit on the drawing.
Q3Which materials are possible for bushings?
Aluminium, stainless steel, free-cutting steel, quenched and tempered steel, brass, bronze, copper and plastics (POM, PEEK, PA, PTFE). If you need a 3.1 material certificate, state it in your enquiry.
Q4How is concentricity ensured?
By turning bore and outside diameter in one setup. That way good turning shops achieve concentricity of ≤ 0.01 mm. We place your bushing with a shop that works this way.
Q5Are bushings with cross holes and threads possible?
Yes. On turn-mill centres with driven tools and a C axis, cross holes, threads and flats are made in the same setup. We place your part with a shop that has such a machine.
Q6What is the minimum quantity?
1 piece. For series, partner shops use bar feeders, which lowers the unit price. The enquiry and the placement are free of charge for you.
Q7How long does delivery take?
The partner shop states the lead time in its quote. It depends on complexity, quantity, material and capacity. If it is urgent, put your target date in the enquiry. We will then look specifically for a shop that can meet it.
Q8Can I enquire without a drawing, with a sample only?
Say in your enquiry that you only have a sample bushing and state material, quantity and application. We will clarify with you whether a partner shop can measure the sample and reproduce it.
Request bushings & sleeves
Send us your drawing. We review it and get back to you within 24 hours with the right partner shop.
Ready for the
next step?
Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .