Prototypes & Single Parts, First Samples to Pre-Series
CNC prototypes and single parts from 1 piece: we review your drawing and place it with a vetted partner shop for turning and milling.
CNC prototypes and single parts are machined directly from solid material, without mould or casting tools. This pays off from 1 piece and for pre-series of up to about 50 pieces. Strobel Industry places prototypes in metal and plastics with vetted partner shops for turning and milling. Enquiry and placement are free of charge, reply within 24 hours.
From 3D Model to Finished Part
Prototypes and single parts must be available quickly and must not cause tooling costs. CNC machining delivers both: the drawing or 3D model goes straight into the CAM system and the part is machined from solid material.
We place prototypes, first samples, test parts and pre-series with vetted partner shops. Turned parts go to shops with turn-mill centres or sliding-head lathes, milled parts to shops with 3- and 5-axis machining centres. The prototype is made with the same care as the later series part.
Materials for Prototypes
Prototypes from the series material, so your tests take place under real conditions. State the material in your enquiry.
Aluminium (6082/7075)
Lightweight, easy to machine and readily available. The most common prototype material for lightweight parts and housings.
Stainless Steel (1.4301/1.4404)
For prototypes with corrosion requirements. Medical technology, food industry and offshore.
Structural Steel (S235/S355)
Strong and economical. For functional prototypes and mechanically stressed single parts.
Quenched & Tempered (42CrMo4)
High strength for stressed prototypes. Shafts, bolts and axles for load testing.
Brass & Copper
For prototypes with electrical or thermal requirements. Fittings and contact parts.
Titanium (Grade 2/5)
For prototypes in medical technology and aerospace. Lightweight, biocompatible and high strength.
Benefits for Prototypes & Single Parts
From 1 Piece
Even a single part is possible. It is machined directly from solid material, with no minimum quantity.
No Tooling Costs
Unlike casting or injection moulding, CNC needs no mould. The drawing is enough.
Reply in 24 h
Experts from our team review your drawing and get back to you within 24 hours with the right partner shop. Put your target date directly in the enquiry.
Series-Identical Quality
Prototypes from the series material with the tolerances and surfaces of the later series. This makes real functional testing possible.
All Common Formats
STEP, IGES, DXF or PDF: send what you have. Experts from our team check material and manufacturability before placement.
On to Series
If the prototype proves itself, the same partner shop can usually take on the series too. Program and clamping solution are then already in place.
Your Prototype in 5 Steps
Send Drawing
3D model or 2D drawing with material, tolerances and quantity by email or upload.
Review
Experts from our team check manufacturability, material and tolerances.
Reply in 24 h
We get back to you within 24 hours and name the right partner shop.
Quote & Production
The partner shop quotes price and delivery date. After your approval it programs and machines the part.
Delivery
The partner delivers directly to you and invoices you directly. If you need an inspection report, state it in your enquiry.
Prototype Quality at Series Level
Tolerances IT7, IT8
IT7 and IT8 are common tolerance grades for turned and milled prototypes. Enter tighter tolerances down to IT6 in the drawing and we place the job with a shop that holds them reliably.
Surfaces Ra 0.8 to 1.6
Ra 1.6 is a common standard finish in turning and milling, Ra 0.8 requires fine machining. State polishing, anodising or coating in your enquiry and we place the job with partner shops that supply it.
Inspection Report
If you need an inspection report with actual values of the critical dimensions, state it in your enquiry. We place the job with partner shops that supply it.
Material Certificate
Inspection certificate 3.1 per EN 10204 for traceability in regulated industries: state it in your enquiry and we place the job with partner shops that supply it.
Typical machines for Prototypes
Turn-mill centre
CNC lathe with driven tools for rotationally symmetric prototypes. Turning, drilling and milling in one setup.

Machining centre
Machining centre with 3 to 5 axes for prismatic prototypes with demanding geometries. We place your part with the shop whose machine fits size and material.
Prototypes for Your Industry
Mechanical Engineering
Functional prototypes for load testing, test rigs and pre-series components.
Medical Technology
Prototypes in titanium and stainless steel for approval tests and clinical studies.
Research & Development
Test parts and specimens for lab tests, material trials and feasibility studies.
Startup & Product Dev.
From concept to tangible prototype. Iterate and optimise without tooling costs.
Special Machinery
Individual single parts for special constructions.
Maintenance & Spares
Have discontinued spare parts reproduced from drawings or samples.
Questions about Prototypes & Single Parts
Q1What is the minimum quantity?
1 piece. Because CNC machining needs no mould or casting tool, even a single prototype pays off. We place your enquiry with a partner shop set up for single parts.
Q2What does a prototype cost?
The price depends on material, geometry, tolerances and quantity. Complete machining in one setup often saves costs compared to several machining steps. The partner shop states the price for your part in its quote. Enquiry and placement are free of charge for you.
Q3How long does manufacturing take?
The partner shop states the lead time in its quote. It depends on complexity, quantity, material and capacity. If it is urgent, put your target date in the enquiry. We will then look specifically for a shop that can meet it.
Q4What file formats do you accept?
STEP (.stp), IGES (.igs), DXF and PDF drawings. Even a sketch with dimensions and tolerances is enough for review and placement.
Q5Do prototypes have the same quality as series parts?
Yes, if they are made from the series material with the series tolerances. Enter the tolerances in the drawing. We place the job with a partner shop that holds them and can take on the later series if you wish.
Q6Is a pre-series possible too?
Yes, we also place pre-series of about 5 to 50 pieces. They are ideal for testing assembly processes and for approval before series production. State the planned series size in your enquiry.
Q7Do you also advise on material selection?
Yes. Experts from our team help with material selection, considering strength, corrosion resistance, weight and cost.
Q8Can a single part be made from a sample?
Yes. Note in your enquiry that only a sample part is available. We place the job with partner shops that measure the sample and make your single part or spare part from it, even without an existing drawing.
Request a Prototype
Send us your drawing with quantity. We review it and get back to you within 24 hours with the right partner shop.
Ready for the
next step?
Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .