Turned Parts from Stainless Steel
CNC turned parts from V2A, V4A, Duplex and other stainless steels, from one-off parts to large series. We review your drawing and place it with a vetted partner shop. Reply within 24 hours.
Stainless steel turned parts from 1.4301 (304), 1.4404 (316L) or Duplex are used in food processing, medical and chemical industries. The tough grades require adapted cutting data and high-pressure coolant. Strobel Industry places stainless steel turned parts made to drawing with vetted partner shops, from 1 piece. State material certificates 3.1 per EN 10204, passivation or electropolishing in your inquiry. Reply within 24 hours.
Stainless Steel Turned Parts, Corrosion-Resistant & Precise
Stainless steels are indispensable for turned parts when corrosion resistance, food contact or high temperatures are required. The austenitic grades 1.4301 (V2A) and 1.4404 (V4A) cover approx. 80% of all inquiries.
Stainless steel places special demands on machining: lower cutting speeds, high-pressure coolant and wear-resistant inserts. We place your part with partner shops that routinely turn all common grades.
Stainless Steel Grades Overview
Our partner shops process all common austenitic, ferritic and duplex stainless steels. The right grade depends on corrosion requirements, strength and approvals.
1.4301 (V2A)
The classic: good corrosion resistance, food-safe, good machinability. For mechanical engineering, food industry and general applications.
1.4404 (V4A)
Molybdenum-alloyed for increased resistance to chlorides and acids. For chemical, pharmaceutical and marine applications.
1.4571 (V4A)
Titanium-stabilized variant of V4A. Better weldability and intergranular corrosion resistance. For pressure vessels and piping.
Duplex 1.4462
Twice the strength of V2A with comparable corrosion resistance. For highly stressed components in oil & gas, offshore and chemical industries.
17-4PH (1.4542)
Precipitation-hardenable, strengths up to 1,300 MPa possible. For valves, pump parts and highly stressed components.
1.4305 (Free-cutting)
Sulfur-alloyed stainless steel with optimized machinability. Ideal for series parts with short cycle times.
Benefits of Stainless Steel Turned Parts
Corrosion Resistant
Natural passive layer protects against rust, acids and media. No painting or coating necessary.
Food Safe
V2A and V4A are approved for food contact (EU 1935/2004). Ideal for food and pharmaceutical industries.
Temperature Resistant
Service temperatures up to 550°C (austenitic grades). For high-temperature applications in energy technology.
Hygienic
Smooth, pore-free surfaces are easy to clean. Perfect for cleanroom applications and medical technology.
Mechanically Strong
Good strength values (500 to 700 MPa for austenitics, up to 1,300 MPa for 17-4PH). For demanding designs.
Long-lasting
Stainless steel turned parts have extremely long service life. Low life-cycle costs despite higher material price.
Your Stainless Part in 5 Steps
Send Inquiry
Send drawing (STEP, PDF, DXF) with desired grade, quantity and delivery date.
Review & Placement
Experts from our team check drawing, grade and tolerances, with material advice on request. Within 24 hours we name the right partner shop.
Quote & Approval
The partner shop sends you its quote with unit price and lead time. You approve it directly with the partner.
Production by Partner
The partner shop orders the material and turns your part with adapted cutting data and high-pressure coolant.
Delivery
The partner inspects, packs and delivers directly to you. State 3.1 mill certificates in your inquiry and we place the work with partner shops that supply them.
Precision for Stainless Steel Parts
Dimensional Tolerances from IT6
Fits like h6, f7 and H7 reliably achievable even with stainless steel. IT5 through post-grinding possible.
Surfaces to Ra 0.4
Fine turning delivers high-quality surfaces. Electropolishing or vibratory finishing for mirror-smooth surfaces.
Runout ≤ 0.01 mm
Tight positional tolerances even with difficult-to-machine grades like Duplex and 17-4PH.
Threads to DIN
Metric threads, fine threads and pipe threads (G, NPT) in all stainless steel grades. Tolerance class 6H/6g.
Typical Machines for Stainless Steel Parts
Turn-Mill Center
For short turned parts in V2A, V4A and Duplex. High-pressure coolant breaks the tough chips, Y-axis and live tooling allow complete machining in one setup.

Swiss-Type Lathe
For slender stainless parts with small diameters in series. Cutting oil as coolant improves surface finish and tool life on tough grades.
Stainless Steel Parts for Your Industry
Food Industry
Valve cones, adapters and bushings from V2A/V4A for hygienic applications.
Medical Technology
Precision turned parts from 1.4404 for instruments, implants and device components.
Chemical & Pharma
Corrosion-resistant turned parts from V4A and Duplex for reactors and conveyor systems.
Mechanical Engineering
Shafts, bolts and bushings from 1.4301/1.4305 for general mechanical engineering.
Offshore & Energy
Duplex turned parts for oil/gas, wind power and marine technology.
Hydraulics & Pneumatics
High-precision valve bodies, pistons and adapters from 1.4404 and 17-4PH.
Questions about Stainless Steel Parts
Q1What is the difference between V2A and V4A?
V2A (1.4301) contains chromium and nickel. V4A (1.4404) additionally contains molybdenum, which significantly increases resistance to chlorides and acids. V4A is the better choice for chemical, pharmaceutical and marine applications.
Q2Which stainless steel grades are possible?
All common grades: 1.4301 (V2A), 1.4404 (V4A), 1.4571, 1.4305 (free-cutting), 1.4462 (Duplex) and 17-4PH (1.4542). Special grades on request.
Q3Is stainless steel difficult to turn?
Austenitic stainless steels (V2A, V4A) are tougher than structural steel and produce long chips. Experienced turning shops work with adapted cutting data, high-pressure coolant and wear-resistant inserts and achieve the same quality as with free-cutting steel. We place work with partner shops that have this experience.
Q4Are mill certificates per EN 10204 (3.1) available?
Yes. State inspection certificate 3.1 and further documentation (FAI, inspection reports) in your inquiry. We place the work with partner shops that supply it, with a documented heat number.
Q5What surface treatments are available for stainless steel?
Electropolishing, glass bead blasting, passivation (per ASTM A967), vibratory finishing and brushing, for decorative surfaces also grinding and polishing to a mirror finish. State the surface in your inquiry and we place the work with partner shops that supply it.
Q6What is the minimum quantity for stainless steel turned parts?
From 1 piece, from prototype to large series. Series parts from 1.4305 are particularly cost-effective. We place the work with the partner shop that fits your quantity.
Q7What does a stainless steel turned part cost?
Stainless steel is more expensive than structural steel or aluminum, both as material and in machining. The exact price depends on grade, geometry and quantity. The partner shop states the price for your part in its quote.
Q8Can Duplex stainless steel be turned?
Yes. Duplex 1.4462 is significantly harder to machine than V2A/V4A and requires adapted cutting data and special tools. State the grade in your inquiry and we place the work with partner shops experienced in this material.
Request Stainless Steel Turned Part
Send us your drawing with the desired stainless steel grade. We review it and get back to you within 24 hours with the right partner shop.
Ready for the
next step?
Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .