Turned Parts to Drawing
Precision turned parts from aluminium, steel, stainless steel and plastics: we review your drawing and place it with a vetted partner shop. From one-off parts to large series.
CNC turned parts in all common metals and plastics, from a simple bushing to a complex turn-milled part machined complete in one setup. Strobel Industry places turned parts made to drawing with vetted partner shops, tolerances down to IT6, from 1 piece. Experts from our team review every drawing, reply within 24 hours.
What are CNC Turned Parts?
CNC turned parts are precise components produced on computer-controlled lathes. The workpiece rotates in the spindle while a fixed tool removes material. This creates rotationally symmetric parts to drawing.
Unlike conventional turning, CNC control enables the highest precision and repeatability. Complex contours, threads, grooves and fits are manufactured in a single setup. Modern CNC lathes with driven tools and Y-axis can additionally perform milling, drilling and thread-cutting operations.
The result: rotationally symmetric precision parts such as shafts, bushings, bolts and adapters, in quantities from 1 to 50,000+ with consistent quality.
Highest Precision
Tolerances to ±0.005 mm and surface finishes to Ra 0.4 µm through CNC-controlled processes.
Repeatability
Every part identical, whether 1 piece or 50,000. The program guarantees consistent quality.
Efficiency
With bar feeders, series also run unmanned. This shortens lead times and lowers the unit price.
Short Turning vs. Long Turning
Which turning process fits depends on the part geometry. Our partner shops cover both processes, and we place your part with the right shop:
| Feature | Short Turning | Long Turning |
|---|---|---|
| Diameter | medium to large Ø | small Ø |
| Part Geometry | Short, compact parts | Long, slender parts |
| Tool Carrier | Turret (12+ stations) | Tool comb |
| Guidance | Chuck / Collet | Guide bush |
| Precision | down to IT6 | down to IT6, even on slender parts |
| Typical Parts | Flanges, bushings, adapters | Pins, contacts, shafts |
| Speciality | Complete machining with Y-axis | Vibration-free even at L/D > 5 |
Not sure which method? We are happy to advise, simply send us your drawing.
Parts we place
Shafts & Axles
Drive shafts, cardan shafts, motor shafts, stepped, with grooves, threads and fits.
Bushings & Sleeves
Plain bearings, spacer bushings, mounting sleeves, machined inside and out, with tolerances down to IT6.
Bolts & Pins
Dowel pins, threaded bolts, locating pins, hardened or unhardened, with head machining on request.
Adapters & Flanges
Hydraulic adapters, hose connectors, flange plates, complete machining with cross-holes.
Thread Adapters
Metric, inch, NPT, fine thread, internal and external threads, single piece or series.
Custom Turned Parts
Individual geometries to drawing, also with driven tools and Y-axis.
Automatic Turned Parts
High-volume series production on CNC automatic lathes, screws, nuts, fasteners in large quantities.
Materials for your turned parts
Aluminium
AlMg3, EN AW-6082 T6, EN AW-7075
Lightweight, heat dissipation, aerospace
Structural Steel
S235JR, S355J2, C45, 16MnCr5
Mechanical engineering, axles, shafts
Stainless Steel
1.4301, 1.4404, 1.4571
Medical, food, chemical industry
Brass/Copper
CuZn39Pb3, CW614N, E-Cu
Electrical, hydraulics, fittings
Plastic
POM, PEEK, PA6, PTFE
Wear parts, insulation, medical
Titanium
Ti Gr. 2, Ti6Al4V
Aerospace, medical implants
Special Alloys
Inconel, Hastelloy, Bronze, Monel
High-temperature, chemical, marine
Surface finishes for your turned parts
State surface treatments in your enquiry. We place the job with partner shops that deliver the parts ready treated:
Anodising
Protective and decorative coating for aluminium. Hard or soft anodising, also coloured.
Zinc Plating
Cathodic corrosion protection for steel parts. Blue, yellow or black chromating.
Blackening
Thin iron oxide layer for decorative corrosion protection on steel parts.
Electroless Nickel
Uniform Ni-P coating even on complex geometries. High wear resistance.
Hardening
Case hardening, induction hardening or plasma nitriding, depending on material and requirements.
Grinding & Polishing
Finish machining for tightest tolerances and surface finishes down to Ra 0.1 µm.
CNC turned parts for your industry
From single part to large batch
One-off & Initial Series
Prototypes, first articles and initial series for development and validation. If it is urgent, put your target date in the enquiry.
Series
Optimised programs, falling unit prices. Call-off quantities are agreed directly with the partner shop.
Large Series
Partner shops with bar feeders also run unmanned, around the clock.
Large Series, Unattended
Largely automated production with bar feeders and process monitoring at specialised partner shops.
Quality in every turned part
Drawing Review
Experts from our team review every drawing for manufacturability, tolerances and material before placement.
First Article Inspection
If you need a first article inspection report to your specification, state it in your enquiry. We place the job with partner shops that provide it.
Material Certificates
Inspection certificates 2.1, 2.2 and 3.1 to EN 10204: state in your enquiry which ones you need.
Measurement Report
Good turning shops measure with calibrated gauges and digital metrology. State required inspection reports in your enquiry.
Your turned parts in 3 easy steps
Send Drawing
Upload your technical drawing as PDF, STEP or DXF, or send it by email.
Reply in 24 h
Experts from our team review the drawing and get back to you within 24 hours with the right partner shop.
Quote & Production
The partner shop prepares the quote, makes your turned parts and delivers directly to you.
Frequently Asked Questions about CNC Turned Parts
How much do CNC turned parts cost?
The unit price depends on material, complexity and quantity. The partner shop states the price for your part in its quote. The enquiry and the placement are free of charge for you.
What tolerances are achievable with CNC turned parts?
ISO 2768-m is standard. Good turning shops achieve tolerances down to ±0.005 mm and surfaces down to Ra 0.4 µm, and very tight tolerances are often ground. State your requirements on the drawing and we place the job with a shop that holds them.
How quickly can turned parts be manufactured?
The partner shop states the lead time in its quote. It depends on complexity, quantity, material and capacity. If it is urgent, put your target date in the enquiry. We will then look specifically for a shop that can meet it.
Can turned parts also include milling operations?
Yes. Lathes with driven tools and Y-axis machine cross holes, flats, spanner flats and gearing in one setup. We place work with partner shops that have such machines.
Which diameters are possible?
Small diameters from a few millimetres are made on sliding-head lathes, larger turned parts on turn-mill centres with a chuck. Which diameter is possible for your part depends on the partner shop. State dimensions and quantity in your enquiry and we will check.
What is the difference between long and short turning?
In sliding-head turning the bar is pushed through a guide bushing, ideal for long, slender parts with small diameters. In short turning the workpiece is held firmly in the chuck, ideal for compact parts with larger diameters. We check on the basis of your drawing which process fits.
Which surface treatments are possible?
Common options are anodising, zinc plating, black oxide, electroless nickel, hardening, grinding and polishing. State the treatment in your enquiry and we place the job with partner shops that deliver the parts ready treated. On request we advise what suits the material and application.
Are special alloys possible too?
Yes. Besides standard materials our partner shops also machine special alloys such as Inconel, Hastelloy, bronze and Monel. Name the material in your enquiry and we check which shop machines it reliably.
What is an automatic turned part?
Automatic turned parts are series parts manufactured fully automatically on CNC automatic lathes with bar feeder. Typical examples: screws, bolts, contacts and fasteners in quantities from 500.
Are material certificates and measurement reports included?
State inspection certificates to EN 10204 (2.1, 2.2, 3.1), inspection reports and first article inspection reports in your enquiry. We place the job with partner shops that provide these documents.
Request turned parts?
Send us your drawing as PDF, STEP or DXF. We review it and get back to you within 24 hours with the right partner shop.
Ready for the
next step?
Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .