CNC parts for medical technology
Implant components, instrument parts and housings made to drawing. We review your enquiry and place it with a vetted partner shop.
CNC parts for medical technology are mostly made from titanium grade 5, stainless 1.4441 or PEEK and demand tight tolerances, fine surfaces and unbroken traceability. Strobel Industry places your enquiry with vetted partner shops. State material, certificates and documentation in your enquiry and we look for a shop that supplies them. Reply within 24 hours.
Highest precision for critical parts
Medical components demand the tightest tolerances, perfect surfaces and complete documentation. Our partner shops turn and mill implant components, instrument parts and housings in titanium, stainless 1.4441 and PEEK.
State the 3.1 material certificate, documented dimensional check, single-batch material and individual marking in your enquiry. We place it with partner shops that supply them.
Documented quality
Medical technology needs unbroken traceability. List the documents you require in your enquiry, from material certificate to inspection report. We place it with partner shops that supply them.
Typical areas of use
Implants
Bone screws, plates, pins and fixators in titanium grade 5 and stainless 1.4441, polished to Ra 0.4 for optimal biocompatibility.
Surgical instruments
Handpieces, drill guides, retractors and special tools in hardened stainless steel with ergonomic surfaces.
Device components
Precision parts for diagnostic devices, laboratory automation and analysers: pistons, valves, adapters.
Housings & holders
Sterilisable housings and cassette holders in stainless steel or aluminium, sealed turned and electropolished.
Dental parts
Abutments, implant posts and drill guide components in titanium, plus preparations for zirconia work.
Pharmaceutical parts
Dosing pistons, mixing shafts and vessel parts for pharmaceutical machinery, designed free of dead space and polished.
What makes medical technology different
Biocompatible materials
Titanium grade 5 (3.7165), stainless 1.4441 (surgical), PEEK. Our partner shops machine the common materials of medical technology.
Surfaces < Ra 0.8
For implants and instruments, fine turned surfaces down to Ra 0.4 are common, and polishing or electropolishing smooths them further. State the required roughness in your enquiry.
Complete documentation
3.1 material certificates, inspection reports for the toleranced dimensions, batch traceability. State the scope in your enquiry and agree archiving and records directly with the partner shop.
Cleaning & packaging
Cleaned, packed free of oil and grease, individually packed with batch marking if required. Put it in your enquiry and we place it with partner shops that supply this.
Frequently asked questions
Common choices are titanium grade 5 (Ti6Al4V / 3.7165) for load bearing implants and stainless 1.4441 (AISI 316LVM) for instruments, with PEEK for non-metallic implants. State the 3.1 material certificate in your enquiry.
Standard CNC turned: Ra 1.6. Fine turned: Ra 0.8. Polished: Ra 0.4. Electropolished: Ra 0.2. What is achievable depends on geometry and material. We check this beforehand on the basis of your drawing.
That varies from shop to shop. If you need a supplier with ISO 13485, say so in your enquiry. We will then look specifically for a partner shop that can prove the certification.
Yes. Our partner shops make single parts and small batches for preclinical and clinical testing. State in your enquiry which documents belong with each part, such as certificate, inspection report and drawing.
Cleaned and packed free of oil and grease in protective film is usual. State individual packaging with batch number and barcode in your enquiry. You agree the packaging directly with the partner shop in the quote.
The partner shop states the price in its quote. It is usually above that of standard CNC parts, because materials such as titanium cost more and tighter tolerances, finer surfaces and more documentation take time. The enquiry and placement are free of charge for you.
Request a medical component
Send us your drawing with material and documentation requirements. We review it and get back to you within 24 hours with the right partner shop.
Request a part Ready for the
next step?
Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .