Skip to content
Specialisation

Precision turned parts

CNC turned parts with tolerances down to ±0.005 mm, H7/g6 fits and surfaces down to Ra 0.4: we place them with vetted partner shops.

Tolerance ±0.005 mm
Surface Ra 0.4 µm
Concentricity < 0.01 mm
Quantity from 1 piece
Request a precision turned part
In short

Precision turned parts are turned parts with tolerances to IT6 and surfaces down to Ra 0.4 µm, such as shafts, bushings, bolts and pins made of machinable metals. Strobel Industry places them with vetted partner shops according to your drawing. Specialists from our team review the tolerances and get back to you within 24 hours with the right shop.

IT11 ±0,1 mm IT9 ±0,05 mm IT7 ±0,02 mm IT6 ±0,005 mm ±0,005 Tolerance classes compared
Tolerances

IT6 precision to drawing

Good precision turning shops work with machines that position to within a few micrometres. For fit tolerances (H7, g6, f7) every part is measured individually, with calibrated gauges and documented inspection. We place orders with partner shops that work this way.

The key to precision: rigid machines, sharp tools, a temperature controlled working area and an experienced operator who keeps the offsets under control.

Part types

Typical precision turned parts

From bearing bushings to valve seats: our partner shops turn precision parts for demanding applications in mechanical engineering, medical technology and automation.

Bearing seats Valve parts Collets Sealing seats
Technical data

Typical specifications

±0.005
Tolerance (mm)
H7/g6/f7 fits
Ra 0.4
Surface (µm)
Finish turned, polished
on request
Diameter
Chucked and bar work
< 0.01
Concentricity (mm)
Concentricity to DIN
from 1
Quantity
One-off to large series
on request
Inspection report
state it in your enquiry
Process

How your precision turned parts come about

1

Drawing review

Specialists from our team check your drawing for manufacturability and critical tolerances and give you feedback.

2

Placement

Within 24 hours we get back to you with the right partner shop. The partner prepares the quote. State any 3.1 material certificates in your enquiry.

3

CNC programming

The partner shop creates the NC program, with particular attention to finishing passes and surfaces.

4

Precision machining

Turning is done on turn-mill centres with driven tools. Partner shops with bar feeders also run series unmanned.

5

Quality control

The partner inspects the toleranced dimensions and delivers directly to you. If you need an inspection report, state it in your enquiry.

FAQ

Frequently asked questions

About ±0.02 mm is standard. For fits (H7, g6, f7) good precision turning shops achieve ±0.005 mm, with every part measured. Even tighter tolerances (IT5) are possible in individual cases. We check this on the basis of your drawing.

Standard: Ra 3.2 µm (finish turned). Fine turned: Ra 1.6 µm. Polished: Ra 0.4 µm. For anything smoother we recommend grinding or polishing as a secondary operation.

Good precision turning shops measure toleranced dimensions with calibrated gauges such as micrometers and snap gauges. We only place orders with vetted partner shops. If you need a full inspection report, state it in your enquiry.

All machinable metals: free cutting steel, stainless (1.4301, 1.4571), aluminium (6082, 7075), brass, titanium. The material affects the achievable tolerance and surface finish.

From 1 piece (prototype) to large series. For series we place orders with partner shops that have bar feeders and also run unmanned.

The partner shop states the lead time in its quote. It depends on complexity, quantity, material and capacity. If it is urgent, put your target date in the enquiry. We will then look specifically for a shop that can meet it.

Enquire about a precision turned part

Send us your drawing. We review it and get back to you within 24 hours with the right partner shop.

Request a part
Contact

Ready for the next step?

Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .

Strobel Industry Team
✉️ Send Email 📞 +49 (0)172 51 00 715

We will get back to you within 24 hours.