Skip to content
Special Material & Non-Ferrous Milled Parts

Milled Parts from Titanium, Copper, Plastics & Brass

Milled parts in titanium, copper, bronze, PEEK, POM and brass made to drawing. We review your enquiry and place it with a vetted partner shop that machines the material regularly.

In short

Milled parts in special materials such as titanium, copper, bronze, brass, PEEK and POM need material-specific cutting data: titanium is milled at low cutting speed and high feed, copper with very sharp tools, PEEK dry. Strobel Industry places such parts made to drawing with vetted partner shops, 3-axis and 5-axis, from 1 piece. Specialists from our team review every drawing, reply within 24 hours.

WERKSTOFFETi Grade 5E-Cu57POM / PEEKCuZn39Pb35-ACHS-FRÄSENCNCFERTIGTEIL✓TITAN · KUPFER · KUNSTSTOFF · MESSINGMIT GEWINDEBEARBEITUNG
Expertise

CNC Milling Titanium, Copper & More

Titanium, copper and engineering plastics need completely different machining strategies: low cutting speeds for titanium, sharp tools for smearing copper alloys and dedicated plastic cutters for PEEK and POM. Not every milling shop has that experience. We place your part with a partner shop that machines the material regularly.

On 5-axis machining centres, threads, precision bores and freeform surfaces are made in one setup. This saves re-clamping time and improves accuracy. Which machine suits your part is something we clarify when reviewing your drawing.

5-Axis
Machining
8+
Materials
24h
Reply
IT7
Tolerance Class
Materials

Materials for Milled Parts

From titanium to copper to PEEK: our partner shops mill the right material for your application. We advise you on material choice beforehand.

Titanium

Ti Grade 5 (Ti6Al4V)

Highest strength at lowest weight. For aerospace, medical technology and highly stressed lightweight components.

Copper

E-Cu57 (Electrolytic Copper)

Highest electrical conductivity. For busbars, contacts, heat sinks and electrodes in semiconductor technology.

PEEK

PEEK (Polyetheretherketone)

High-temperature plastic (up to 260°C) with excellent chemical resistance. For seals, insulators and implants.

POM

POM (Polyoxymethylene)

High stiffness, low friction, good dimensional stability. For gears, guides and precision parts in mechanical engineering.

Bronze

CuSn8 (Bronze)

Excellent sliding properties and high wear resistance. For plain bearings, worm gears and guide bushings.

Brass

CuZn39Pb3 (Brass)

Good machinability, corrosion resistant, decorative. For valve bodies, fittings, plain bearings and decorative components.

Benefits

Benefits for These Materials

01

Material Expertise

Titanium, copper, bronze, plastics and brass each need their own cutting data. We choose a partner shop that knows your material.

02

Thread Machining

Metric threads, fine pitch and imperial threads directly in the clamping. Helicoil pilot holes for soft materials.

03

5-Axis Machining

Complex geometries in a single setup. Undercuts and angled bores without re-clamping.

04

Small Series & Single Parts

Enquiries from 1 piece, from prototype to series. The partner shop sources the raw material in special alloys.

05

All Formats

STEP, DXF or PDF. The partner shop does the CAM programming directly from your 3D model. A sketch also works as a starting point.

06

Post-Processing

Polishing, anodizing (titanium), gold plating (brass), nickel plating (copper): state the treatment in your enquiry and we place it with partner shops that provide it.

Process

Your Special Material Part in 5 Steps

01
Schritt 01

Send Inquiry

Send your drawing or 3D model with material, quantity and target date. Material advice included.

02
Schritt 02

Review & Placement

Specialists from our team check feasibility and material. Within 24 hours we get back to you with the right partner shop.

03
Schritt 03

Quote & Approval

The partner shop prepares the quote with unit price and delivery date. After your approval it sources the raw material.

04
Schritt 04

CNC Milling

The partner shop mills your part with material-specific cutting data, on 3 or 5 axes, and inspects the dimensions.

05
Schritt 05

Delivery

The partner delivers directly to you: deburred, inspected, with surface treatment and inspection report on request.

Tolerances

Precision for Special Materials

Dimensional Tolerances from IT7

Even for difficult-to-machine materials like titanium. For brass and plastics, IT6 fits are also possible.

Surfaces to Ra 0.8

Brass and bronze can be mirror-polished (Ra 0.2). Titanium and copper typically Ra 0.8, 1.6.

Threads IT6H

Metric, fine pitch, imperial, form-cut threads in brass and plastic. Thread milling for titanium and hardened parts.

Thermal Expansion

Plastics have 5 to 10× higher thermal expansion than metal. Tight tolerances need adjusted allowances and measurement at a defined temperature. Put critical dimensions in your enquiry.

In the network

Typical machines for Special Materials

Machining centre

Machining centre

Machining centre with 3 to 5 axes. Rigid enough for titanium, sensitive enough for plastics. We place your part with the shop whose machine fits material, size and quantity.

Axes
3 to 5
Materials
Ti, Cu, PEEK
Batch size
from 1 piece
Industries

Special Material Milled Parts for Your Industry

Mechanical Engineering

Bronze plain bearings, POM guides, brass valve bodies, special materials for special applications.

Medical Technology

PEEK implants and titanium instruments. Biocompatible, sterilizable and manufactured to drawing.

Electrical Engineering

Copper busbars, brass contacts and PEEK insulators. Highest conductivity and insulation values.

Aerospace

Titanium structural parts with highest strength at lowest weight. 5-axis geometries to aerospace standards.

Food Technology

Brass and bronze components for fittings and pumps. FDA-compliant plastic parts from PEEK.

Optics & Precision

Brass mounts and copper heat sinks for optical instruments. Highest surface quality.

FAQ

Questions about Milled Parts from Special Materials

Q1Which special materials can be milled?

Brass (CuZn39Pb3, CuZn37), titanium (Grade 2, Grade 5), copper (E-Cu57, E-Cu58), bronze (CuSn8, CuAl10), PEEK, POM, PA6.6 and other engineering plastics. Also exotic alloys on request.

Q2Is titanium difficult to mill?

Yes. Titanium needs low cutting speeds, high feed, a rigid machine and stable clamping. We place titanium parts with partner shops that are set up for it. Tool costs are higher, which is reflected in the unit price.

Q3Can threads be milled in brass?

Yes. Metric, fine pitch and imperial threads are made directly in the setup. Brass machines well and gives clean thread flanks. Specify thread type and tolerance on the drawing.

Q4Are milled parts in PEEK possible?

Yes. PEEK is a high-temperature plastic for seals, insulators and medical parts. Our partner shops mill PEEK dry with sharp tools, tolerances to IT7 are common.

Q5What do titanium milled parts cost?

Titanium is considerably more expensive than aluminium or steel, both as material and to machine: low cutting speeds, higher tool wear. The partner shop states the price in its quote. It depends on geometry, tolerances and quantity. Enquiry and placement are free of charge.

Q6Who sources the raw material?

The partner shop sources the raw material: titanium plates, brass round bars, copper blocks or PEEK stock. If you need a 3.1 mill certificate, state it in your enquiry and we place it with partner shops that provide it.

Q7Can copper heat sinks be milled?

Yes, for example in E-Cu57 with fine fin structures. Copper needs sharp tools and adapted cutting data to keep burrs to a minimum. We place them with partner shops experienced in copper.

Q8Which surface treatments are possible?

Brass: nickel plating, gold plating, polishing. Titanium: anodizing (Type II/III). Copper: nickel plating, tin plating. PEEK and POM usually need no post-treatment. State the treatment in your enquiry and we place it with partner shops that provide it.

Request a Special Material Milled Part

Send us your drawing or STEP file for your milled part in brass, titanium, copper or plastic. We review it and get back to you within 24 hours with the right partner shop.

Contact

Ready for the next step?

Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .

Strobel Industry Team
✉️ Send Email 📞 +49 (0)172 51 00 715

We will get back to you within 24 hours.