Skip to content
Stainless Steel & Steel Milled Parts

Milled Parts from Stainless Steel & Steel

Have milled parts made from V4A, V2A, 42CrMo4 and other steels, on 3 or 5 axes, from 1 piece. We review your drawing and place it with a vetted partner shop.

In short

Stainless steel and steel milled parts are made by 3-axis and 5-axis machining, typically from 1.4301 (V2A), 1.4404 (V4A), S355 or 42CrMo4. Stainless steel needs adapted cutting data and rigid clamping; with these, good milling shops achieve tolerances down to IT7 and surfaces down to Ra 0.8 µm. Strobel Industry places such milled parts made to drawing with vetted partner shops, from 1 piece. Reply within 24 hours.

ROHMATERIAL1.4404 V4A42CrMo4PLATTE · BLOCK · FLACH5-ACHS-FRÄSENCNCFERTIGTEIL✓EDELSTAHL · STAHL · WERKZEUGSTAHLFERTIGTEIL GEPRÜFT
Material

CNC Milling Stainless Steel & Steel

Stainless steel and steel are demanding to mill: low cutting speeds, high cutting forces and considerable heat. They call for rigid machines, the right choice of tools and, for complex geometries, 5-axis machining in one setup.

Our partner shops mill all common stainless and carbon steel grades. With 5-axis machining, often indexed (3+2), undercuts, angled holes and faces on several sides are produced without re-clamping. We place your part with the shop whose machine fits its size, material and quantity.

5-Axis
Machining
6+
Steel Grades
24h
Reply
IT7
Tolerance Class
Materials

Stainless Steel & Steel Grades for Milled Parts

From corrosion-resistant V4A to heavy-duty tool steel: our partner shops mill the right material for your application.

V4A

1.4404 / V4A (AISI 316L)

Molybdenum-bearing stainless steel with enhanced corrosion resistance. For chemical, pharmaceutical, food and medical applications.

V2A

1.4301 / V2A (AISI 304)

The standard stainless steel: Good corrosion resistance, good weldability. For general applications and mechanical engineering.

42CrMo4

42CrMo4 (1.7225)

Quenched and tempered steel with high strength (1,100 MPa). For highly stressed machine parts, gears and shafts.

S355

S355J2 (1.0577)

Structural steel with good weldability (355 MPa). Economical for brackets, consoles and fixtures.

C45

C45E (1.1191)

Case hardening and quenched/tempered steel for shafts, axles and mechanically stressed parts. Good machinability.

1.2379

1.2379 (X155CrVMo12-1)

Cold work / tool steel with very high wear resistance (62 HRC). For stamping and cutting tools.

Benefits

Benefits of Steel Milled Parts

01

5-Axis Machining

Complex geometries, undercuts and angled bores in a single setup. Fewer re-clampings = higher precision.

02

Corrosion Resistance

V4A milled parts for chemical, pharmaceutical and food industries. Passivation and electropolishing available as post-treatment.

03

High Strength

Quenched and tempered steels like 42CrMo4 (up to 1,100 MPa) for highly stressed components. Heat treatment before or after milling.

04

Small Series & Single Parts

Milled parts from 1 piece. Optimised NC programs keep unit costs low even for small batch sizes.

05

Drawing or 3D Model

STEP, DXF or PDF: we accept all common formats. The partner shop programs directly from your 3D model.

06

Surface Treatment

Black oxide, zinc plating, nickel plating, passivation or electropolishing: state the treatment in your enquiry and we place it with partner shops that supply it.

Process

Your Milled Part in 5 Steps

01
Schritt 01

Send drawing

Send your drawing or 3D model with material, quantity and target date. Material advice on request.

02
Schritt 02

Review & placement

Experts from our team check the drawing, clamping and material. Within 24 hours we get back to you with the right partner shop.

03
Schritt 03

Quote & approval

The partner shop prepares the quote with price and lead time. You approve it directly with the partner.

04
Schritt 04

Production

The partner shop procures plates, blocks or sections in the required grade and mills your part with internal coolant and adapted cutting data.

05
Schritt 05

Delivery

The partner delivers the part deburred and invoices. State surface treatment, 3.1 certificate or inspection report in your enquiry.

Tolerances

Precision for Steel Milled Parts

Dimensional Tolerances from IT7

Fits H7/g6 also for hardened steels. IT6 with grinding or rework possible.

Surfaces to Ra 0.8

Stainless steel and steel typically deliver Ra 0.8, 1.6 after milling. Ra 0.4 achievable with finishing cuts.

Flatness & Parallelism

Thermally stable machining and stress-relief annealing minimise distortion in large milled parts.

Threads & Precision Bores

Metric threads, Helicoil inserts (recommended for stainless steel) and precision bores H7 in all steel grades.

In the network

Typical machines for Stainless Steel & Steel

Machining centre

Machining centre

Machining centre with 3 to 5 axes and a rigid build, as stainless steel and tool steel require. The 5th axis allows machining of several sides in one setup.

Axes
3 to 5
Part size
on request
Batch size
from 1 piece
Industries

Steel Milled Parts for Your Industry

Mechanical Engineering

Housings, brackets, base plates from S355 and 42CrMo4 for plant and special machinery.

Chemical & Pharma

V4A milled parts for reactors, valves and plants. Electropolished and FDA-compliant on request.

Food Technology

Corrosion-resistant parts from V2A/V4A for processing machines. Passivated and hygiene-compliant.

Tool & Mold Making

Tool steel 1.2379 for stamping, cutting and forming tools. Hardened and ground on request.

Energy Technology

Highly stressed components from quenched and tempered steel for generators, turbines and hydraulic systems.

Automotive

Prototypes and special parts from steel and stainless steel. Single parts to small series.

FAQ

Questions about Milled Parts from Stainless Steel & Steel

Q1Which stainless steel grades are possible?

V4A (1.4404), V2A (1.4301), duplex (1.4462) and other austenitic and ferritic grades. State other grades in your enquiry and we check which partner shop processes them.

Q2Can hardened steel be milled?

Steel up to about 50 HRC can be machined with solid carbide cutters. For tool steel 1.2379 the usual route is: rough milling, hardening, grinding the functional surfaces. Put the hardness in your enquiry and we place it with a suitable partner shop.

Q3What is the difference between V2A and V4A?

V2A (1.4301) is the standard stainless steel. V4A (1.4404) additionally contains molybdenum and is significantly more resistant against chlorides and pitting. For chemical and food applications we recommend V4A.

Q4Is heat treatment possible?

Yes. State quenching and tempering, case hardening, nitriding or induction hardening in your enquiry. We place the work with partner shops that supply this. The heat treatment then appears in the partner's quote.

Q5How large can steel milled parts be?

That depends on the partner shop. State the dimensions in your enquiry and we check which shop can mill your part. For very large parts there is a separate page on large-part milling.

Q6What do stainless steel milled parts cost?

Stainless steel is more expensive to machine than aluminium: lower cutting speeds, higher tool wear. The price depends on geometry, material and quantity. The partner shop states the price for your part in its quote.

Q7Are 5-axis milled parts possible?

Yes. Our partner shops mill on 5 axes, often as 3+2 (indexed). This produces complex geometries with undercuts and angled holes in one setup. If you need simultaneous machining for freeform surfaces, say so in your enquiry. We check which shop can do it.

Q8Are welded assemblies possible too?

Yes. State in your enquiry that the milled parts are to be joined into a welded assembly, for example TIG-welded in V2A or S355. We place the work with partner shops that supply this.

Request Steel Milled Part

Send us your drawing or STEP file. We review it and get back to you within 24 hours with the right partner shop for your stainless steel or steel milled part.

Contact

Ready for the next step?

Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .

Strobel Industry Team
✉️ Send Email 📞 +49 (0)172 51 00 715

We will get back to you within 24 hours.