Aluminum Milled Parts from Drawing
CNC milled parts from aluminum EN AW-6082, 7075, 5083, made from your drawing or 3D model, from prototype to series. We review your data and place it with a vetted partner shop. Reply within 24 hours.
Aluminum milled parts from 6082, 7075 or AlMg3 are produced by 3-axis and 5-axis machining. The excellent machinability of aluminum allows high feed rates, fine surfaces down to Ra 0.4 µm and competitive unit prices. Strobel Industry places aluminum milled parts made from drawing or STEP file with vetted partner shops, from 1 piece, anodizing and powder coating on request. Reply within 24 hours.
Why Aluminum Milled Parts from CNC Manufacturing?
Aluminum is an ideal material for CNC milled parts: low weight (2.7 g/cm³), excellent machinability and high cutting speeds make production economical even with complex geometries. From simple plates with holes to 3D freeform parts, aluminum mills cleanly.
Our partner shops mill aluminum on 3-axis and 5-axis machining centers from STEP files, DXF drawings or PDF. Turn-mill parts are made on lathes with live tooling. We place your part with the shop that fits its size, geometry and quantity.
Aluminum Alloys for Milled Parts
Our partner shops mill all common aluminum alloys. The choice depends on strength, corrosion resistance and weldability.
EN AW-6082 T6 (AlMgSi1)
The standard structural alloy: Good strength (310 MPa), excellent anodizability and weldability. For general mechanical engineering.
EN AW-7075 T6 (AlZnMgCu)
The high-strength alloy (570 MPa). For aerospace, motorsport and structural components. Limited weldability.
EN AW-5083 H111 (AlMg4.5Mn)
Seawater resistant and good weldability. For shipbuilding, offshore and corrosion-stressed components. Medium strength.
EN AW-2024 T3 (AlCuMg1)
High strength (470 MPa) and good fatigue resistance. Classic aerospace aluminum. Not weldable, not anodizable.
EN AW-6060 T6 (AlMgSi)
Profile alloy with good surface finish. Excellently anodizable, ideal for housings and covers with decorative requirements.
EN AW-6061 T6 (AlMg1SiCu)
Versatile alloy with good strength (310 MPa) and corrosion resistance. Good weldability, widely used in the US market.
Benefits of Aluminum Milled Parts
3× Faster than Steel
Aluminum allows cutting speeds up to 3,000 m/min and high feed rates. This means shorter cycle times and lower unit costs.
Lightweight
At 2.7 g/cm³ only one third the weight of steel. Weight reduction up to 65% for structural components possible.
Excellent Anodizability
Anodizing in various colors possible (6082, 6060). Hard protection against wear and corrosion with decorative appearance.
Complex 3D Geometries
Pockets, freeform surfaces, thin walls, aluminum can be milled cleanly and with minimal distortion even for complex parts.
STEP, DXF & PDF
All common data formats are possible. Partner shops import STEP files directly into CAM, which saves programming time and cost.
Good Weldability
5000 and 6000 series alloys are well TIG/MIG weldable. Assemblies can be joined after milling.
Your Milled Part in 5 Steps
Send Inquiry
Send drawing or 3D model (STEP, DXF, PDF) with desired alloy, quantity and delivery date.
Review & Placement
Experts from our team check geometry, alloy and tolerances. Within 24 hours we name the right partner shop.
Quote & Approval
The partner shop sends you its quote with unit price and lead time. You approve it directly with the partner.
Production by Partner
The partner shop sources the raw material (plates, blocks or profiles) and mills your part on the right machining center.
Delivery
The partner deburrs, inspects and delivers directly to you. State anodizing or other surface treatments in your inquiry.
Precision for Aluminum Milled Parts
Dimensional Tolerances from IT7
Fits H7/g6 also for deep pockets and long bores. IT6 with rework possible.
Surfaces to Ra 0.4
Aluminum delivers very good surfaces directly from the mill. Polishing or anodizing for Ra < 0.2 µm possible.
Flatness ≤ 0.05 mm
Adapted clamping and machining strategies keep distortion low even for large-area parts.
Threads & Precision Bores
Metric threads, Helicoil inserts and precision bores H7 in all aluminum alloys.
Typical Machines for Aluminum Milling

Machining Center
For aluminum plates, blocks and housings. 3-axis machining for pockets and contours, with 4th and 5th axis also on several sides in one setup.
Turn-Mill Center
For rotationally symmetric parts with milled features: flats, slots and cross-holes are machined with live tooling directly on the lathe.
Aluminum Milled Parts for Your Industry
Mechanical Engineering
Adapter plates, brackets and housings from 6082 for plants and special machinery.
Aerospace
Structural components from 7075 and 2024 with tight tolerances and material certificate.
Medical Technology
Housings and functional parts from anodized 6082/6060 for medical devices.
Electronics & Enclosures
Heat sinks, front panels and electronic enclosures from 6060/6082 with anodized finish.
Motorsport
Lightweight high-performance parts from 7075-T6, brackets, adapters, struts.
Prototyping
Turning 3D models into functional prototypes, from a single piece. Changes go straight into the next sample.
Questions about Aluminum Milled Parts
Q1Which aluminum alloys can be milled?
All common EN AW alloys: 6082, 7075, 5083, 2024, 6060, 6061 and more. Also extruded profiles and cast alloys on request.
Q2Is milling from a STEP file possible?
Yes. Partner shops import STEP files directly into their CAM system. IGES, DXF, DWG and PDF drawings are also possible. Send us your data and we get back to you within 24 hours with the right partner shop.
Q3How large can aluminum milled parts be?
That depends on the partner shop. State the dimensions in your inquiry and we check which shop can mill your part. For very large parts there is a separate page on large-part milling.
Q4Is anodizing possible?
Yes. State anodizing (natural, black, colored) or hard anodizing in your inquiry. We place the work with partner shops that supply it themselves or through their finishers. The 6000 series alloys are particularly well suited for this.
Q5What do aluminum milled parts cost?
Aluminum is economical to mill thanks to high cutting speeds. The unit price depends on geometry, tolerances and quantity, and unit costs drop significantly in small series. The partner shop states the price for your part in its quote.
Q6Can thin walls be milled?
Yes. With adapted cutting strategies (HSC milling, small step-over) and suitable tools, very thin walls are possible. The limit depends on wall height, alloy and clamping. We check this on the basis of your drawing before placing the work.
Q7What is the difference between 6082 and 7075?
6082 is the all-rounder: Good weldability, anodizable, moderate strength (310 MPa). 7075 is the high-performance alloy (570 MPa), but not weldable and limited anodizability. 7075 for highly stressed parts, 6082 for everything else.
Q8What is the minimum quantity?
From 1 piece, from prototype through small series to larger lots. For series, optimized NC programs reduce unit costs. We place the work with the partner shop that fits your quantity.
Request Aluminum Milled Part
Send us your drawing or STEP file. We review it and get back to you within 24 hours with the right partner shop.
Ready for the
next step?
Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .