Skip to content
CNC Milled Parts

Milled Parts to Drawing

We review your drawing and place your milled parts with a vetted partner shop that matches material, geometry and quantity.

In short

CNC milled parts are made by a rotating tool removing material from a solid block. Strobel Industry places milled parts in aluminium, steel, stainless steel, titanium and plastics with vetted partner shops: 3-axis and 5-axis machining, tolerances to ±0.01 mm, from 1 piece. Enquiry and placement are free of charge, reply within 24 hours.

from 1
Piece
±0.01
mm Tolerance
3+5
Axis Milling
Ra 0.8
µm Surface
CNC Milling Explained

What are CNC Milled Parts?

CNC milled parts are precision components machined from a solid block by computer-controlled milling machines. The cutting tool rotates at high speed while the workpiece stays clamped. Turning works the other way round: there the workpiece rotates.

The process starts with CAD design data that is converted into machine commands via CAM software. This produces even highly complex geometries with tight tolerances and excellent repeatability, from single parts to large series.

Complex 3D geometries in a single setup
High dimensional accuracy and repeatability
Wide range of materials from aluminium to titanium
Milling Process Comparison

3-Axis vs. 5-Axis Milling

The right milling process depends on part complexity: from economical 3-axis machining and indexed 5-axis machining (3+2) to simultaneous 5-axis milling. If you need simultaneous machining, say so in your enquiry. We check which partner shop can do it.

Feature3-Axis3+2-Axis5-Axis Simultaneous
AxesX, Y, Z linearX, Y, Z + indexedX, Y, Z + A, B simultaneous
GeometriesFlat surfaces, pockets, hole patternsAngled machining, multiple sidesFree-form surfaces, undercuts, turbine blades
SetupsMultiple re-clampingFewer re-clampingsSingle setup
Tolerances±0.05 mm±0.02 mm±0.01 mm
Cost efficiencyVery cost-effectiveGood value for moneyOptimal for complex parts
Typical Milled Parts

What Partner Shops Mill

Housings & Mounts

Electronics housings, sensor mounts, motor housings, with precision bore holes and sealing surfaces.

Plates & Brackets

Mounting plates, adapter plates, machine attachments, face milling, hole patterns, tapped holes.

Heat Sinks

High-performance aluminium heat sinks with fine fin structures, CNC milled for optimal heat dissipation.

Prototype Housings

Functional prototypes machined from solid, fast iteration for product development.

Mould Tools & Inserts

Die inserts, injection moulds, electrodes, from hardened steel, copper or graphite.

Special Components

Complex 3D contours and undercuts, in indexed 5-axis machining in a single setup.

Jigs & Fixtures

Clamping fixtures, inspection gauges, assembly jigs, from hardened steel or aluminium to drawing.

Complexity Levels

From simple to highly complex

±0.05 mm

Standard

2D contours, hole patterns, flat surfaces. 3-axis machining.

±0.02 mm

Medium

Pockets, steps, threads, fits. 3-axis with indexing.

±0.01 mm

Complex

Undercuts, angled hole patterns, 5-side machining. Indexed 5-axis milling.

Material Overview

Materials for milled parts

Aluminium

Light, easy to machine, corrosion-resistant. Ideal for housings and heat sinks.

AlMg3, 6082-T6, 7075-T6

Structural Steel

High strength, weldable. For machine attachments and structural parts.

S235, S355, C45, 42CrMo4

Stainless Steel

Corrosion-resistant, food-safe. For medical and food technology.

1.4301, 1.4404, 1.4571

Plastic

Light, wear-resistant, electrically insulating. For special components.

POM, PEEK, PA6, PTFE

Brass / Copper

Excellent machinability, high conductivity. For electrical engineering and decorative parts.

CuZn39Pb3, CW614N, E-Cu

Titanium

Highest strength at low weight. For aerospace and medical technology.

Ti Gr. 2, Ti6Al4V

Special Alloys

High-temperature resistant, corrosion-proof. For extreme operating conditions.

Inconel, Hastelloy, Tool Steel

Surface Finishing

Surfaces for your milled parts

Anodising, hardening or blasting: state the surface you need in your enquiry. We place the job with partner shops that deliver it, in house or through their finishing partners.

Anodising

Stable oxide layer on aluminium. Coloured or natural. Corrosion protection + aesthetics.

Hard Coat (Hard Anodising)

Extremely hard aluminium surface (up to 70 HRC). Wear protection for functional surfaces.

Zinc Plating / Chromating

Cathodic corrosion protection for steel parts. Blue, yellow or black chromating.

Electroless Nickel Plating

Uniform Ni-P layer even on complex geometries. Corrosion and wear protection.

Hardening / Nitriding

Case hardening for maximum wear resistance. Plasma nitriding for minimal distortion.

Grinding / Polishing

Highest surface finish to Ra 0.2 µm. For sealing and sliding surfaces.

Blasting

Glass bead blasting or sandblasting for uniform, matte surfaces.

Batch Size Options

From 1 piece to series

1 to 500 pcs

One-off & Small Batch

Prototypes, first articles and small lots. Ideal for development and validation. Please put your target date in the enquiry.

500 to 5,000 pcs

Series

Optimised programming, attractive unit prices. Framework agreements are made directly with the partner shop.

5,000 to 20,000 pcs

Large Series

Partner shops with zero-point clamping systems and automated loading for maximum efficiency.

20,000+ pcs

Large Series, Unattended

Partner shops with pallet changers also run unattended. In-process quality inspection at the partner.

Industries & Applications

Milled parts for your industry

Mechanical Engineering

Mounts, brackets, housings, adapter plates

Automotive

Prototypes, pre-series parts, inspection fixtures

Medical Technology

Implant components, instruments, housings

Aerospace

Structural parts, lightweight components from titanium & aluminium

Tool & Mould Making

Die inserts, injection moulds, electrodes

Prototyping

Functional samples, first samples, design models

Quality Assurance

Quality to Your Spec

Experts from our team review every drawing before placement. Measurement, inspection and documentation are handled by the partner shop to your requirements.

Drawing Review

Experts from our team check manufacturability, material and tolerances before the enquiry goes to a partner shop.

3D Measurement Technology

We place jobs with partner shops using tactile and optical coordinate measurement for complete dimensional inspection.

First Article Inspection Report

If you need a first article inspection report per VDA or PPAP, state it in your enquiry. We place the job with partner shops that provide it.

Traceability

3.1 material certificates, batch tracking and inspection reports: state them in your enquiry and the partner shop supplies them.

How to Order

Your path to the finished milled part

01

Send Data

Technical drawing or 3D data (STEP, IGES, PDF) with quantity via email or enquiry form.

02

Reply in 24 h

Experts from our team review the drawing. Within 24 hours we name the right partner shop.

03

Quote & Production

The partner shop prepares the quote with price and delivery date. After your approval it makes the parts.

04

Delivery

The partner shop delivers directly to you and invoices you directly. Inspection report and material certificate on request.

FAQ

Frequently Asked Questions about CNC Milled Parts

How much do CNC milled parts cost?

The price depends on size, material, complexity, tolerances and quantity. The partner shop states the price in its quote. Enquiry and placement are free of charge for you.

What file formats can I send?

Ideally STEP (.stp), IGES (.igs) or 3D-PDF. DXF, DWG and native CAD formats (SolidWorks, Inventor, Catia) also work. For 2D drawings a PDF with dimensions is enough.

When do I need 5-axis milling instead of 3-axis?

5-axis milling is necessary for: free-form surfaces, undercuts, machining more than 3 sides, or when tight tolerances require machining in a single setup. For flat 2D contours and simple pockets, 3-axis milling is sufficient.

Can milled parts also include turning operations?

Yes. For parts with prismatic and rotationally symmetric features we place the job with partner shops that combine milling and turning, for example on mill-turn centres. Typical examples: flanges with hole patterns, housings with cylindrical bores.

How large can milled parts be?

That depends on the partner shop. The network includes machining centres for small precision parts as well as shops for large components. State the dimensions in your enquiry and we will find the right shop.

What is the difference between 3+2-axis and 5-axis simultaneous?

With 3+2-axis, the rotary axes are positioned and locked before milling, the actual machining is 3-axis. With 5-axis simultaneous, all five axes move at the same time, enabling true free-form surfaces. 3+2 covers five sides in a single setup economically. If you need simultaneous machining, say so in your enquiry.

What surface treatments are possible?

Common options are anodising, hard coat, zinc plating, electroless nickel plating, hardening, nitriding, grinding, polishing and blasting. The choice depends on material, application and appearance. State the surface in your enquiry and we place the job with partner shops that deliver it.

Can aluminium milled parts be anodised?

Yes. Aluminium can be anodised natural or in colour (for example black, red, blue), and hard anodised (hard coat) for heavily stressed surfaces. The layer protects against corrosion and wear. State colour and coating type in your enquiry.

How long does delivery of CNC milled parts take?

The partner shop states the lead time in its quote. It depends on complexity, quantity, material and capacity. If it is urgent, put your target date in the enquiry. We will then look specifically for a shop that can meet it.

Do you also arrange contract milling?

Yes. If you supply the material yourself, we place the job with partner shops that do contract milling to your drawing and specification. You agree the details directly with the partner shop.

Request milled parts?

Send us your drawing with quantity. We review it and get back to you within 24 hours with the right partner shop.

Contact

Ready for the next step?

Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .

Strobel Industry Team
✉️ Send Email 📞 +49 (0)172 51 00 715

We will get back to you within 24 hours.