Turned Parts from Brass, Copper & Bronze
Have turned parts made from brass, copper, bronze and other non-ferrous metals, from one-off parts to large series. We review your drawing and place it with a vetted partner shop.
Non-ferrous turned parts made from brass (CuZn39Pb3), copper (Cu-ETP) or bronze (CuSn8) are used for plain bearings, electrical contacts, fittings and wear parts. Free-cutting brass allows particularly short cycle times and very good surfaces. Strobel Industry places non-ferrous turned parts made to drawing with vetted partner shops, from 1 piece to large series. Reply within 24 hours.
Why Non-Ferrous Metals for Turned Parts?
Brass, copper and bronze are among the most machinable materials. Brass (CuZn39Pb3) is the standard for automatic turned parts, copper for electrical and thermal conductors, bronze for wear-resistant plain bearings.
Small brass parts in large series are made economically on sliding-head lathes with bar feeders, larger copper and bronze components on turn-mill centres with complete machining. We place your part with the partner shop that has the right machine.
Non-Ferrous Metals Overview
Our partner shops process all common brass, copper and bronze alloys. The choice depends on function, conductivity, wear requirements and corrosion resistance.
CuZn39Pb3 (Brass)
Free-cutting brass: Outstanding machinability, short chips, fast cycle times. The standard material for brass series turned parts.
CuZn37 (Brass)
Lead-free brass with good formability and corrosion resistance. For drinking water applications (EU directive) and decorative parts.
Cu-ETP (Electrolytic Copper)
Pure copper with 99.9% Cu. Highest electrical and thermal conductivity. For busbars, contacts and heat exchangers.
CuSn8 (Tin Bronze)
Wear-resistant bearing bronze. Good sliding properties, high load capacity. For bushings, plain bearings and gears.
RG7 (Gunmetal)
Corrosion-resistant copper-tin-zinc alloy. For fittings, valve bodies and pump parts. Seawater resistant.
CuNi12Zn24 (Nickel Silver)
Silvery-white copper-nickel-zinc alloy. Good corrosion resistance and decorative appearance. For fittings and instrument parts.
Benefits of Non-Ferrous Turned Parts
Outstanding Machinability
Brass is the reference material for machinability (100% per ISO 3685). Short chips, high cutting data, short cycle times.
Electrical Conductivity
Copper has the highest conductivity of all engineering metals at 58 MS/m. For contacts, busbars and electronics.
Sliding & Wear Properties
Bronze alloys are ideal bearing materials. Self-lubricating properties reduce maintenance effort.
Corrosion Resistant
Brass and bronze resist many media, gunmetal is even seawater resistant. No additional coating needed.
Decorative Appearance
Golden brass shine, reddish copper or silvery nickel silver, non-ferrous metals also offer visually attractive surfaces.
Lead-Free Available
For drinking water applications, lead-free brass alloys to the EU directive are available (CuZn37, CuZn42). State the requirement in your enquiry.
Your Part in 5 Steps
Send drawing
Send your drawing (STEP, PDF, DXF) with material, quantity and target date.
Review & placement
Experts from our team check the drawing and material. Within 24 hours we get back to you with the right partner shop.
Quote & approval
The partner shop prepares the quote with unit price and lead time. You approve it directly with the partner.
Production
The partner shop procures the material and turns your part: small series parts on the sliding-head lathe, larger parts on the turn-mill centre.
Delivery
The partner delivers and invoices. State surface treatment, 3.1 certificate or inspection report in your enquiry.
Precision for Non-Ferrous Parts
Dimensional Tolerances from IT6
Brass and copper can be turned excellently to tight fits. IT5 available through post-grinding if needed.
Surfaces to Ra 0.2
Non-ferrous metals deliver excellent surfaces directly from the machine. Ra 0.2 µm achievable on brass without extra effort.
Runout ≤ 0.01 mm
Tight runout and concentricity tolerances for valve seats, contacts and bearing bushings.
Threads to DIN
Metric threads, fine threads, pipe threads (G, NPT) and special threads in all non-ferrous metals.
Typical machines for Non-Ferrous Parts
Turn-mill centre
For larger parts in copper and bronze. With driven tools and sub-spindle for complete machining in one setup.

Sliding-head lathe
For brass series parts with small diameters. With bar feeder and short cycle times.
Non-Ferrous Parts for Your Industry
Electrical Engineering
Copper contacts, busbars and connector components.
Sanitary & Fittings
Brass turned parts for valves, fittings and taps (lead-free on request).
Mechanical Engineering
Bearing bushings from CuSn8, spacer sleeves and adapters from brass.
Automotive Industry
Brass press-fit bushings, contact pins and sensor housings.
Shipbuilding & Offshore
Gunmetal turned parts (RG7) for seawater applications and pump parts.
Musical Instruments
Precision turned parts from brass and nickel silver for instrument making.
Questions about Non-Ferrous Parts
Q1Which non-ferrous metals are possible?
Brass (CuZn39Pb3, CuZn37), copper (Cu-ETP, Cu-OF), tin bronze (CuSn8), gunmetal (RG7/RG5), nickel silver (CuNi12Zn24) and special bronzes. State other alloys in your enquiry and we check which partner shop processes them.
Q2Why is brass ideal for series turned parts?
Brass CuZn39Pb3 has outstanding machinability due to its lead content: short chips, high cutting speeds and very good surface finishes, up to 50% shorter cycle times than steel.
Q3Is lead-free brass possible?
Yes. For drinking water applications and EU-compliant products there are CuZn37, CuZn42 and other lead-free alloys to the EU Drinking Water Directive. Put the requirement in your enquiry and we place it with a partner shop that processes these alloys.
Q4Which surface finishes are possible for brass turned parts?
Nickel plating, chrome plating, gold plating, tin plating, polishing and glass bead blasting. Brass is particularly well suited to electroplating. State the finish you need in your enquiry and we place it with partner shops that supply it.
Q5How much do brass turned parts cost?
Brass series turned parts are very economical thanks to short cycle times, even though brass usually costs more than steel as a material. The unit price depends on geometry and quantity. Copper and bronze are more expensive because of the material. The partner shop states the price for your part in its quote.
Q6Is copper suitable for CNC turning?
Yes, but copper is soft and forms long chips. With adapted cutting edge geometry and the right feed, high-quality copper turned parts are possible, such as busbars and contacts for electrical engineering. We place the work with partner shops experienced in copper.
Q7What applications is tin bronze CuSn8 suitable for?
CuSn8 is the classic bearing material: High wear resistance, good emergency running properties and corrosion resistance. Ideal for bushings, plain bearings and worm gears.
Q8From what quantity are non-ferrous turned parts possible?
From 1 piece. Brass turned parts become particularly economical in larger quantities, because the short cycle times quickly offset the setup effort.
Request Non-Ferrous Turned Part
Send us your drawing with the desired material. We review it and get back to you within 24 hours with the right partner shop.
Ready for the
next step?
Send us your drawing. We review the enquiry and pass it on to a suitable, vetted partner shop, free and without obligation .